Table of Contents
Advertisement
Mounting external GPS antenna
If you install the TomTom LINK 300 in a place
where it is not visible, so that it does not have
a clear view of the sky, you need to use the
TomTom WORK external GPS antenna
accessory (part number 9L09.001) which
comes with an integrated magnet and an
adhesive pad. The TomTom WORK external
GPS antenna is not part of the standard
TomTom LINK 300 product package.
Alternative Mounting
Important!
• Only use the GPS antenna from TomTom
WORK, or the GPS performance will be
poor or will not work at all.
• Tinted windshields or those with integrated
filament heating may prevent good GPS
reception. In this case, place the GPS
antenna in the rear window or on the
outside of the vehicle.
• The magnet of the antenna will remain
attached to the outside of the car at speeds
of up to 108 M/h.
• Install the GPS antenna in a place where it
has a clear view of the sky and is
unobstructed by metal objects.
• The GPS antenna must be placed with the
adhesive pad on an oil free, dry and clean
surface.
• Extreme temperature changes / differences
can affect the adhesive property of the pad.
• To ensure proper GSM/GPRS reception
choose a place where the top side of the
TomTom LINK 300 is unobstructed by
metal objects.
19
EN
Advertisement
Table of Contents
