Table of Contents
Advertisement
After you have successfully tested the
operation of the TomTom LINK 300 (see
Testing operation on page 12) and connected
it to the TomTom navigation device and
TomTom WEBFLEET (see Connecting to
navigation device & WEBFLEET on page 15),
you can now close the TomTom LINK 300 with
the plastic seal.
IMPORTANT: Once you have closed the TomTom
LINK 300 with the plastic seal, the device cannot be
opened again without damaging the seal.
For this, slide the plastic seal over the plug of
the power cable into the housing and press
gently until it engages.
Closing the TomTom LINK 300
Closing the
TomTom LINK
300
17
EN
Advertisement
Table of Contents
