Internet Setup - D-Link DSL-2740E User Manual

Hide thumbs Also See for DSL-2740E:

Table of Contents

Section 4 – Troubleshooting

Internet Setup

Channel Configuration

Choose SETUP > Internet Setup > Channel Config. The page is shown as the

figure appears on the right. In this page, you can add or configure WAN interface

of your router.

Step 1

In the VPI and VCI textbox, enter the VPI and VCI value provided by

your ISP.

Note:

To access the internet, at least one PVC is required to add.

Step 2

In the protocol drop-down list, select the protocol according to the

internet service you subscribed from your ISP. There are 5 types of

protocols: PPP over ATM (PPPoA), PPP over Ethernet (PPPoE),

MAC Encapsulation Routing (1483 MER), IP over ATM (IPoA),

Bridging, 1483 Bridge, 1483 Routed.

D-Link DSL-2740E User Manual

Table of Contents

Show Quick Links

Table of Contents