Fault Tables - Siemens SIMOTICS XP 1LA5 Compact Operating Instructions

Operation
Lubricating before recommissioning
NOTICE
Dry running bearings
Bearings can be damaged if they do not have sufficient grease.
Re-grease the bearings if they have been out of service for more than one year.
•
The shaft must rotate so that the grease can be distributed in the bearings.
Observe the data on the lubricant plate.
Chapter Bearings (Page 140).
8.4

Fault tables

Note
Before removing any faults, please read the information in Chapter Safety notes
(Page 77).
Note
If you operate the motor with a converter, and an electrical fault occurs, then also
observe the information in the converter operating instructions.
The tables below list general faults caused by mechanical and electrical influences.
130
Explosion-protected machines
56100000002002, 01/2016