Local Cable Network Service - Hitron BRG35302 User Manual

•
Ethernetlike MIB, Bridge MIB, Cable Device MIB,
•
Baseline privacy Interface MIB, RF Interface MIB
•
Front Panel LED display for easy network status monitoring.
•
USB connector, with plug n play capability, conveniently located for easy PC access. (BRG35302)
•
Support 802.11g, IP address filtering, Hidden SSID, WEP/ WPA-PSK wireless security
（BWA35302）.

Local Cable Network Service

Before installing the modem:
1. Read this entire User's Manual from front to back in sequence.
2. Find the Serial Number, RF and Ethernet address located on the rear panel of the cable
modem and write them here:
Serial Number S/N: ____________________
RF and ETH MAC: ____________________
3. Contact your local cable service operator for Internet/cable network access. Your local
cable operator will check for cable access availability in your area, install a cable line (if
necessary), provide you with an access account, set up configuration and verify other
technical details.
4. Ask your local cable service provider about adding additional IP addresses to your account.
See "Decide Which Installation Process to Use" on page 7 for more information.
5/31
V1.0