Installation Procedures; Before You Start Installing; Installation Tools - Nextel iR1200 Installation Manual

In this chapter, you will learn everything you need to know to begin installing your
iR1200 modem.
This chapter includes:

Before You Start Installing

•

Installation Tools

Before You Start Installing
Experienced technicians familiar with installing similar types of hardware equipment
should perform installation of the modem.
Planning is the key to a quick and simple installation. Before drilling holes or running
wires, you should inspect the vehicle or area of the building to determine how and where
you intend to mount the modem, antenna and accessories.
NOTE: The following instructions are intended to provide you with quick reference
to installing your iR1200 modem.
•
Mount Modem – Mount the modem in the desired location.
•
Mount Antenna – Mount the antenna using the instructions included with your
selected antenna's installation guide.
•
Connect Cables – Connect the antenna cables to the mounted modem.
•
Connect Power – Connect the AC power cables and ignition sensor cables to the
mounted modem.
•
Power Up – Power up the modem to check for successful installation.
Installation Tools
The following are the recommended tools you will need to install the iR1200 modem:
•
Portable Drill
•
Center Punch
•
Four #10 self-tapping sheet metal screws

Installation Procedures

Installation Procedures
•
Hammer
•
Crimp tool
•
Phillips Screwdriver
Page 13
Page 13
13