Thermostat Control; Master Control - Hotpoint HTP05 Use And Care & Installation Instructions Manual

Operating Your Air Conditioner Controls
OFF

MASTER CONTROL

Master Control
OFF turns air conditioner off.
HI FAN provides high fan speed
operation without cooling.
LO FAN provides low fan speed
operation without cooling.
HI COOL provides cooling with
high fan speed operation.
LO COOL provides cooling with
low fan speed operation.
4
THERMOSTAT

Thermostat Control

When you turn the Thermostat
Control to the desired setting, the
thermostat will automatically
control the temperature of the
indoor air. The higher the number
selected, the cooler the indoor air
will be.
The Save Energy Range is a visual
reminder that you can conserve
energy by selecting a higher room
temperature but still keep the room
cool and less humid than outside.
For normal cooling
1. Set Master Control at HI COOL.
2. Set Thermostat Control at
desired number (usually the
midpoint is a good starting
position). If room temperature is
not satisfactory after a reasonable
time, set the Thermostat Control at
a higher number for a cooler room
or at a lower number for a warmer
room.
For maximum cooling
1. Set Master Control at HI COOL.
2. Set Thermostat Control at 8.
For quieter operation
1. Set Master Control at LO
COOL.
2. Set Thermostat Control at
desired number.
When the Thermostat Control is
set on 7 or 8 and the Fan is set on
low speed, moisture may freeze on
the coils and prevent the unit from
cooling. If this happens, set the
Fan at high speed and set the
Thermostat Control at a lower
number.
For air circulation and
filtering without cooling
Set the Master Control at LO FAN
or HI FAN.