Control Settings; Ventilation Control; Thermostat Control - Hotpoint KCM08 Use And Care Manual

MASTER CONTROL
Master Control Swikh
OFF
turns air conditioner off.
*Fan permits low fan
operation without cooling.
*Fan hi high fan
operation without cooling.
Saver Switch must be in the "norm"
position.
Cool 10 permits cooling with low
fan speed operation.
Cool hi permits cooling with high
fan speed operation.
—

Thermostat Control

When you turn the Thermostat
Control to the desired setting, the
speed
thermostat will automaticall~ control
the temperature of the indoor air.
speed
The higher the number selected,
the co;ler the indoor air will be.
THERMOSTAT
4

Ventilation Control

When the slide switch is at the
"closed" position, the vent door
is closed and only the air inside
the room can be circulated and
conditioned.
Slide the switch to the left to the
"open" position and the vent door
opens to allow a small amount of
outdoor air to enter the room.
Slide the switch to the right to the
"exhaust" position and the vent
door opens to allow air, smoke or
odors to be exhausted from the
room.
POWER SAVER
The Power Saver Switch controls
the fan operation. When it's in the
"norm" position, the fan will
circulate room air continuously.
When it's in the "save" position,
the fan will automatically cycle on
and off with the compressor.
Switch must be in the "norm"
position.