Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS (conti n ued)
6.
Insert clips into slots at bottom of channel on
both the left and right side. Secure clip to window
stool with screw provided.
7. Cut foam sash-gap gasket to window width and
stuff between top of lower sash and glass pane
upper sash to provide seal.
8. Install the sash bracket to secure the air
conditioner and lock both sashes in place.
Sash B
10
REMOVAL FROM WINDOW
power cord,
2. Remove sash-gap gasket from between
windows and unscrew metal sash bracket from
window.
3. Remove screws installed through top of sliding
panels into lower sash and clips holding channels
to stool.
4. Close curtains. ~. EPING A FIW GNP ON
rock air conditioner backward and drain major
portion of water in base of unit. Care should be
of
taken in lifting unit from window to avoid spilling
any remaining water.
5. Store parts for reuse along with air conditioner.
SPECIAL INSTALLATION
extra wide kit, W50A, from your dealer or
distributor.
2. For installation in a slider window application,
or distributor.
3.
attach a 2 inch wide wood strip to the stool, with
either nails or screws. Strip should be as wide as
Screw
window opening and flush with back side of stool.
Thickness of wood strip should be determined by
the amount of interference.
1. Turn the air conditioner off and disconnect
1. For windows from 3611 to 4911 in width, order an
overcome storm window interference,
To
I
Advertisement
Table of Contents
