How To Connect Electricity; Electrical Requirements; Extension Cords; Grounding - Hotpoint KES15 Use And Care & Installation

IMPORTANT: have these instructions with the appliance.
OWNER: Keep these instructions for future use.
Electrical Safetv—
IMPORTANT... "
Please Read Carefully.

How to connect electricity

For personal safety, this
appliance must be properly
grounded.
Electrical requirement
230/208-volt models require their
own single branch circuit supplying
230/208-volt a.c., protected with a
time delay fuse or circuit breaker.
This is recommended for best
performance and to prevent
overloading house wiring circuits,
which could cause a possible fire
hazard from overheating wires.
The power cord on these models
has ~ 230/208-volt perpendicular,
tandem or large tandem type plug
that mates respectively with a
230/208-volt ~erpendicular.
tandem or la~ge &ndem type wall
outlet. These types of outlets are
available at most hardware stores.
230/208-VOLT MATCHING
PERPENDICULAR TYPE WALL OUTLET
LINE CORD PLUG
REQUIRES 20 AMP TIME DELAY FUSE
OR CIRCUIT BREAKER PROTECTION
MATCHING
230/208-VOLT
TANDEM TYPE WALL OUTLET
LINE CORD PLUG
REQUIRES 15 AMP TIME DELAY FUSE
OR CIRCUIT BREAKER PROTECTION
230/208-VOLT MATCHING
LARGE TANDEM TYPE WALL OUTLET
LINE CORD PLUG
REQUIRES 30 AMP TIME DELAY FUSE
OR CIRCUIT BREAKER PROTE~lON
7
It is important to have the wall
qualified electrician if there is
any doubt as to whether a proper
ground exists.
Use of etiension cords
not recommended
Because of potential safety
hazards under certain conditions,
we strongly recommend against the
use of an extension cord. However,
if you still elect to use an extension
cord, it is absolutely necessary that
it be a UL listed 3-wire grounding
type appliance extension cord and
that the current carrying rating of
the cord in amperes be equal to or
greater than the branch circuit size
shown on the rating nameplate of
the appliance.