Page 1 PowerLite Home Cinema 710HD User's Guide...
Page 3: Table Of Contents
Contents Introduction to Your Projector ... 9 Projector Features... 9 Product Box Contents... 10 Additional Components ... 11 Optional Equipment and Replacement Parts... 11 Warranty and Registration Information ... 12 Notations Used in the Documentation ... 12 Where to Go for Additional Information... 13 Projector Part Locations ...
Page 4 Connecting to a Computer for Sound... 31 Connecting to External USB Devices ... 31 USB Device Projection... 32 Connecting a USB Device or Camera to the Projector... 32 Selecting the Connected USB Source ... 33 Disconnecting a USB Device or Camera From the Projector... 33 Connecting to a Document Camera ...
Page 5 Turning On Auto Iris... 57 Controlling the Volume with the Volume Buttons... 57 Projecting a Slide Show ... 58 Supported Slideshow File Types ... 58 Starting a Slide Show ... 59 Slideshow Display Options ... 61 Adjusting Projector Features ... 63 Shutting Off the Picture and Sound Temporarily ...
Page 6 Replacing the Air Filter... 88 Projector Lamp Maintenance... 90 Replacing the Lamp ... 91 Resetting the Lamp Timer... 96 Replacing the Remote Control Batteries ... 97 Transporting the Projector... 99 Solving Problems ... 100 Projection Problem Tips ... 100 Projector Light Status ... 100 Using the Projector Help Displays ...
Page 7 Projector Electrical Specifications ... 116 Projector Environmental Specifications... 117 Projector Safety and Approvals Specifications... 117 Supported Video Display Formats... 117 USB Display System Requirements ... 119 Notices ... 121 Recycling... 121 Important Safety Information ... 121 Important Safety Instructions... 121 Restriction of Use ...
Page 9: Introduction To Your Projector
• Built-in closed captioning decoder • 1.2× optical zoom ratio for improved zooming capability • Low total cost of ownership with longer lamp life • Epson's Instant Off and Direct Power On features for quick setup and shut down Product Box Contents Additional Components...
Page 10: Product Box Contents
Related concepts Projector Part Locations Product Box Contents Save all the packaging in case you need to ship the projector. Always use the original packaging (or equivalent) when shipping. Make sure your projector box included all of these parts: Projector Remote control Remote control batteries (two AA alkaline) Power cord...
Page 11: Additional Components
Parent topic: Projector Features Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online www.epsonstore.com Epson offers the following optional accessories and replacement parts for your projector:...
Page 12: Warranty And Registration Information
In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Home Service brochure for details.
Page 13: Where To Go For Additional Information
View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24 hours a day. • If you still need help after checking this manual and the sources listed above, you can use the EPSON PrivateLine Support service to get help fast. For details, see "Where to Get Help".
Page 14: Projector Parts - Front/Top
Projector Parts - Front/Top Exhaust vent Lamp cover Horizontal keystone slider Control panel Projector status lights Speaker Air filter cover Intake vent Zoom ring Focus ring...
Page 15: Projector Parts - Rear
Remote receiver A/V Mute slide Front adjustable foot Foot release lever A/V Mute slide lever Parent topic: Projector Part Locations Projector Parts - Rear Remote receiver Audio ports S-Video port USB TypeA/document camera port USB TypeB port Computer port HDMI port Lamp cover screw...
Page 16: Projector Parts - Base
Kensington security lock slot Video port AC input port Parent topic: Projector Part Locations Projector Parts - Base Mounting bracket holes Front adjustable foot...
Page 17: Projector Parts - Control Panel
Rear feet Security cable attachment point Parent topic: Projector Part Locations Projector Parts - Control Panel Power button Source Search button (searches for connected sources) Menu button (accesses projector menu system) Enter button (selects options) Volume control buttons, horizontal keystone adjustment buttons (adjust screen shape), and arrow buttons Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons Esc button (cancels/exits functions)
Page 18: Projector Parts - Remote Control
Related references Projector Light Status Projector Parts - Remote Control...
Page 19 Power button Computer button (cycles through connected computer sources) Video button (cycles through connected video sources) Numeric buttons (enter numbers) Auto button (automatically adjusts position, tracking, and sync settings) Aspect button (selects the image aspect ratio) Num button (when held down, switches numeric buttons to number function) Menu button (accesses projector menu system) Arrow buttons (move through on-screen options and control wireless mouse functions) Enter button (selects options and controls wireless mouse functions)
Page 20: Setting Up The Projector
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Cover Projector Placement You can place the projector on almost any flat surface to project your presentation. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Page 21 Rear Front Ceiling Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.
Page 22: Projection Distance
Related references Projector Setup Settings - Extended Menu Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings.
Page 23: Projector Connections
• For slide shows without a computer, you can connect USB devices (such as a flash drive or camera) or an optional EPSON document camera. Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.
Page 24: Connecting To Video Sources
Connecting to Computer Sources Connecting to External USB Devices Connecting to a Document Camera Parent topic: Setting Up the Projector Related references Projector Setup Settings - Extended Menu Product Box Contents Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector. Connecting to an HDMI Video Source Connecting to a Component-to-VGA Video Source Connecting to an S-Video Video Source...
Page 25: Connecting To A Component-To-Vga Video Source
Note: If you connected a game console, it may take a few seconds for your image to appear. To reduce the lag time, set your game console's input signal to a progressive signal of 480p or 720p. See your game console documentation for instructions. Parent topic: Connecting to Video Sources Connecting to a Component-to-VGA Video Source...
Page 26: Connecting To An S-Video Video Source
Related tasks Connecting to a Video Source for Sound Connecting to an S-Video Video Source If your video source has an S-Video port, you can connect it to the projector using an optional S-Video cable. 1. Connect the S-Video cable to your video source's S-Video output port. 2.
Page 27: Connecting To A Video Source For Sound
2. Connect the other end to the projector's Video port. Note: If you connected a game console, it may take a few seconds for your image to appear. To reduce the lag time, set your game console's input signal to a progressive signal of 480p or 720p. See your game console documentation for instructions.
Page 28: Connecting To Computer Sources
• Windows 7/Windows Vista: Select Run EMP_UDSe.exe in the dialog box that appears to install the EPSON USB Display software. • Windows XP: Wait as messages appear on your computer screen and the projector installs the EPSON USB Display software on your computer.
Page 29: Connecting To A Computer For Vga Video
• Windows 2000: Select Computer, EPSON_PJ_UD, and EMP_UDSe.EXE to install the EPSON USB Display software. • Mac OS X: The USB Display setup folder appears on your screen. Select USB Display Installer and follow the on-screen instructions to install the EPSON USB Display software.
Page 30: Connecting To A Computer For Hdmi Video And Audio
Related tasks Connecting to a Computer for Sound Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable. Note: To connect a Mac that includes only a Mini DisplayPort or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port.
Page 31: Connecting To A Computer For Sound
2. Connect the other end to any available USB port on your computer. 3. If necessary, configure your computer to work with an external USB mouse. See your computer documentation for details. Parent topic: Connecting to Computer Sources Related references Projector Setup Settings - Extended Menu Projector Parts - Remote Control Connecting to a Computer for Sound...
Page 32: Usb Device Projection
USB Device Projection You can project images and other content without using a computer or video device by connecting any of these devices to your projector: • USB flash drive • Digital camera or camera phone • USB hard drive •...
Page 33: Selecting The Connected Usb Source
Connecting to External USB Devices Connecting to a Document Camera You can connect a compatible EPSON document camera to your projector's USB TypeA port to project images viewed by the camera. Note: You may be able to connect different EPSON document camera models to your projector's Computer port.
Page 34: Installing Batteries In The Remote Control
2. Connect the USB cable to the projector's USB TypeA port. 3. Connect the other end of the cable to the document camera's USB Type B port. Parent topic: Projector Connections Related references Optional Equipment and Replacement Parts Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector.
Page 35 2. Insert the batteries with the + and – ends facing as shown. 3. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
Page 36: Opening The Lens Cover
Opening the Lens Cover 1. To open the projector's lens cover, slide the A/V Mute slide lever. 2. To cover the lens or temporarily turn off the projected picture and sound, slide the A/V Mute slide cover closed. Parent topic: Setting Up the Projector...
Page 37: Using Basic Projector Features
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Adjusting the Image Height Image Shape Resizing the Image With the Zoom Ring Focusing the Image Using the Focus Ring Remote Control Operation Selecting an Image Source...
Page 38 2. Connect the power cord to the projector's power inlet. 3. Plug the power cord into an electrical outlet. The projector's power light turns orange. This indicates that the projector is receiving power, but is not yet turned on (it is in standby mode). Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.
Page 39: Turning Off The Projector
2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the power light turns orange. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary).
Page 40 3. To transport or store the projector, make sure the power light is orange (but not flashing), then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange. 4.
Page 41: Selecting The Language For The Projector Menus
Parent topic: Using Basic Projector Features Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button. 3.
Page 42 2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape.
Page 43: Image Shape
Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality.
Page 44: Correcting Image Shape With The Keystone Buttons
Correcting Image Shape with the Keystone Buttons You can use the projector's keystone correction buttons to correct the shape of an image that is unevenly rectangular on the sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2.
Page 45: Correcting Image Shape With Quick Corner
After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape using the Keystone settings in the projector menus. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides.
Page 46 3. Select the Settings menu and press Enter. 4. Select the Keystone setting and press Enter. 5. Select the Quick Corner setting and press Enter. Then press Enter again. You see the Quick Corner adjustment screen. 6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust.
Page 47: Resizing The Image With The Zoom Ring
8. When you are finished, press Esc. Parent topic: Image Shape Resizing the Image With the Zoom Ring 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. 2.
Page 48: Remote Control Operation
Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here.
Page 49: Using The Remote Control As A Wireless Mouse
Parent topic: Using Basic Projector Features Related tasks Replacing the Remote Control Batteries Using the Remote Control as a Wireless Mouse You can use the projector's remote control as a wireless mouse so you can control your computer presentation from a distance. 1.
Page 50: Using The Remote Control As A Presentation Pointer
Related references Projector Setup Settings - Extended Menu Using the Remote Control as a Presentation Pointer You can use the projector's remote control as a pointer to help you call out important information during a presentation. The default pointer shape is an arrow, but you can select an alternative shape using the Settings menu.
Page 51 1. Make sure the connected image source you want to use is turned on. 2. For video image sources, insert a DVD or other video media and press its play button (if necessary). 3. Do one of the following: • Press the Source Search button on the projector or remote control until you see the image from the source you want.
Page 52: Projection Modes
Video and HDMI sources USB port sources (computer display and external devices) Parent topic: Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. •...
Page 53: Changing The Projection Mode Using The Menus
3. To change projection back to the original mode, hold down the A/V Mute button for five seconds again. Parent topic: Projection Modes Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus.
Page 54: Changing The Image Aspect Ratio
If you always want to use a particular aspect ratio for a certain video input source, you can select it using the projector's menus. Changing the Image Aspect Ratio Available Image Aspect Ratios Parent topic: Using Basic Projector Features Related references Image Quality Settings - Image Menu Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it.
Page 55: Color Mode
Aspect ratio setting Auto Normal 16:9 Full Zoom Native Note: The Auto aspect ratio setting is available only for HDMI image sources. Parent topic: Image Aspect Ratio Color Mode The projector offers different Color Modes to provide optimum brightness, contrast, and color for a variety of viewing environments and image types.
Page 56: Available Color Modes
2. If you are projecting from a DVD player or other video source, insert a disc or other video media and press the play button, if necessary. 3. Press the Color Mode button on the remote control to change the Color Mode. The image appearance changes and the name of the Color Mode appears briefly on the screen.
Page 57: Turning On Auto Iris
Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project. 1. Turn on the projector and switch to the image source you want to use. 2.
Page 58: Projecting A Slide Show
2. Press the Volume buttons as necessary to lower or raise the volume. A volume gauge appears on the screen. 3. To set the volume to a specific level for an input source, you can set the volume using the projector's menus.
Page 59: Starting A Slide Show
File contents File type (extension) Image .jpg .bmp .gif .png Parent topic: Projecting a Slide Show Starting a Slide Show After connecting a USB device to the projector, you can switch to the USB input source and start your slide show. Note: You can change the Slideshow operation options or add special effects by highlighting Option at the bottom of the screen and pressing Enter.
Page 60 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter. •...
Page 61: Slideshow Display Options
Related tasks Connecting a USB Device or Camera to the Projector Disconnecting a USB Device or Camera From the Projector Slideshow Display Options You can select these display options when using the projector's Slideshow feature. Setting Display Order Sort Order Continuous Play Screen Switching Time...
Page 62 Setting Options Effect Wipe Dissolve Random Parent topic: Starting a Slide Show Description Transitions between images with a wipe effect Transitions between images with a dissolve effect Transitions between images using a random variety of effects...
Page 63: Adjusting Projector Features
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation.
Page 64: Stopping Video Action Temporarily
Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.
Page 65: Projector Security Features
• To pan around the zoomed image area, use the arrow buttons. • To zoom out of the image, press the E-Zoom – button as necessary. • To return to the original image size, press Esc. Parent topic: Adjusting Projector Features Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features:...
Page 66 1. Hold down the Freeze button on the remote control until you see the Password Protect menu. This takes about five seconds. 2. Press the down arrow to select Password and press Enter. You see the prompt "Change the password?". 3.
Page 67: Selecting Password Security Types
Parent topic: Password Security Types Selecting Password Security Types After setting a password, you see the Password Protect menu. Select the password security types you want to use. If you do not see this menu, hold down the Freeze button on the remote control for five seconds until the menu appears.
Page 68 • If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.
Page 69: Saving A User's Logo Image To Display
Saving a User's Logo Image to Display You can transfer an image to the projector and then display it whenever the projector turns on. You can also display the image when the projector is not receiving an input signal or when you temporarily stop projection (using the A/V Mute feature).
Page 70: Locking The Projector's Buttons
7. Select a zoom percentage and press Enter. You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. Note: It takes a few moments for the projector to save the image; do not use the projector, its remote control, or any connected equipment until it is finished.
Page 71: Unlocking The Projector's Buttons
1. Press the Menu button. 2. Select the Settings menu and press Enter. 3. Select the Control Panel Lock setting and press Enter. 4. Select one of these lock types and press Enter: • To lock all of the projector's buttons, select Full Lock. •...
Page 72 • Use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
Page 73: Adjusting The Menu Settings
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Projector Information Display - Info Menu Projector Reset Options - Reset Menu...
Page 74: Image Quality Settings - Image Menu
2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4.
Page 75 To change settings for an input source, make sure the source is connected and select that source. Setting Options Color Mode See the list of available Color Modes Brightness Varying levels available Contrast Varying levels available Color Saturation Varying levels available Tint Varying levels available Sharpness...
Page 76: Input Signal Settings - Signal Menu
Setting Color Adjustment Auto Iris Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness mode, use the Power Consumption setting. Parent topic: Adjusting the Menu Settings Related references Available Color Modes Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically.
Page 77 To change settings for an input source, make sure the source is connected and select that source. Setting Options Auto Setup Resolution Auto Normal Wide Tracking Varying levels available Sync. Varying levels available Position Up, down, left, right Progressive Video Film/Auto Noise Reduction HDMI Video Range...
Page 78: Projector Feature Settings - Settings Menu
Setting Input Signal Video Signal Aspect Overscan Parent topic: Adjusting the Menu Settings Related references Available Image Aspect Ratios Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Options Description Auto Specifies the signal type from input sources connected to computer ports Component...
Page 79 Setting Options Keystone H/V Keystone Quick Corner Control Panel Lock Full Lock Partial Lock Pointer Shape Three shapes available Description Adjusts image shape to rectangular (horizontally and vertically) H/V Keystone: lets you manually correct horizontal and vertical sides Quick Corner: select to correct image shape and alignment using an on-screen display Controls projector button locking...
Page 80 Setting Options Power Consumption Normal Volume Varying levels available Remote Receiver Front Rear Front/Rear User Button Power Consumption Info Progressive Closed Caption Test Pattern Resolution Test Pattern Parent topic: Adjusting the Menu Settings Related tasks Correcting Image Shape with Quick Corner Description Selects the brightness mode of the projector lamp...
Page 81: Projector Setup Settings - Extended Menu
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Display Options Description Messages Selects various display options Display Background Messages: controls whether messages are displayed on the Startup Screen screen A/V Mute...
Page 82 Setting Options Closed Caption User's Logo – Projection Front Front/Ceiling Rear Rear Ceiling Operation Direct Power On Sleep Mode Sleep Mode Timer Lens Cover Timer High Altitude Mode Standby Mode Communication On Communication Off Description Controls use of closed captions and selects the closed caption channel Creates a screen that the...
Page 83: Projector Information Display - Info Menu
Setting USB Type B Language Parent topic: Adjusting the Menu Settings Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Options Description USB Display...
Page 84: Projector Reset Options - Reset Menu
Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Displays the name of the port to which the current input source is...
Page 85 You cannot reset the following settings using the Reset All option: • Input Signal • User's Logo • Language • Lamp Hours • Password • User Button Parent topic: Adjusting the Menu Settings...
Page 86: Maintaining And Transporting The Projector
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual.
Page 87: Cleaning The Projector Case
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire.
Page 88: Replacing The Air Filter
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.
Page 89 2. Carefully open the air filter cover. 3. Pull the air filter out of the projector. Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations.
Page 90: Projector Lamp Maintenance
4. Place the new air filter in the projector as shown and push gently until it clicks into place. 5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
Page 91: Replacing The Lamp
Projector Lamp Specifications Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury. You can replace the lamp while the projector is mounted to the ceiling, if necessary.
Page 92 4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.
Page 93 6. Lift up the lamp handle and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
Page 94 7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Press the handle down until it locks into place. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.
Page 95 8. Push in the lamp firmly and tighten the screws to secure it. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on.
Page 96: Resetting The Lamp Timer
Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related tasks Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.
Page 97: Replacing The Remote Control Batteries
Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.
Page 98 3. Insert the batteries with the + and – ends facing as shown. 4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
Page 99: Transporting The Projector
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic:...
Page 100: Solving Problems
• The projector's Help system can display information about common problems, if the projector is operating. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs.
Page 101 Power light Lamp light Temperature light Power light Lamp light Temperature light Green Flashing green Orange Flashing orange Off Status and solution Normal operation. Warming up. Wait for an image to appear. Standby or sleep mode. Preparing for monitoring or shutting down. (When the light remains orange, you can unplug the projector.)
Page 102 • If the problem persists, unplug the projector and contact Epson for help. Replace the lamp soon to avoid damage. Do not continue using the projector. A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help.
Page 103: Using The Projector Help Displays
Solving Image or Sound Problems Check the solutions in these sections if you have any problems with projected images or sound. Temperature Status and solution light Flashing red Internal projector error. Turn the projector off, unplug it, and contact Epson for help.
Page 104: Solutions When No Image Appears
Solutions When No Image Appears Solutions When Image is Incorrect Using the USB Display Function Solutions When "No Signal" Message Appears Solutions When "Not Supported" Message Appears Solutions When Only a Partial Image Appears Solutions When the Image is Not Rectangular Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry Solutions When the Image Brightness or Colors are Incorrect...
Page 105: Solutions When Image Is Incorrect Using The Usb Display Function
• With Windows Media Center, reduce the screen size from full screen mode. • With Windows DirectX, turn off DirectX functions. • Turn off the Transfer layered window setting in the EPSON USB Display Settings program on your computer. Parent topic:...
Page 106: Displaying From A Pc Laptop
Displaying From a Mac Laptop Parent topic: Solving Image or Sound Problems Displaying From a PC Laptop If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to display on an external monitor. 1.
Page 107: Solutions When Only A Partial Image Appears
Supported Video Display Formats Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Press the Auto button on the remote control to optimize the image signal. • Try adjusting the image position using the Position menu setting. •...
Page 108: Solutions When The Image Contains Noise Or Static
Correcting Image Shape with the Horizontal Keystone Slider Correcting Image Shape with Quick Corner Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: •...
Page 109: Solutions When The Image Brightness Or Colors Are Incorrect
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen. • Position the projector so the keystone adjustment angle is not so wide that it distorts the image. •...
Page 110: Solutions When There Is No Sound Or Low Volume
• If you are using the USB Display function, turn on the Output audio from the projector setting in the EPSON USB Display Settings program on your computer. • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port.
Page 111: Solutions To Projector Power Or Shut-Off Problems
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to turn on the projector. • The power cord may be defective. Disconnect the cord and contact Epson. • If the projector's lamp shuts off unexpectedly, it may have entered sleep mode after a period of inactivity.
Page 112: Solutions To Password Problems
• If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. • If you lose the remote control you cannot enter a password. Order a new one from Epson. Parent topic:...
Page 113 • Computer or video configuration • Description of the problem Purchase Supplies and Accessories You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online www.epsonstore.com (U.S.
Page 114: Technical Specifications
Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supported Video Display Formats USB Display System Requirements General Projector Specifications Type of display Resolution...
Page 115: Projector Lamp Specifications
Keystone correction angle USB Type B port compatibility USB 1.1 and 2.0 compliant for USB Display or external mouse USB Type A port compatibility One USB 1.1 and 2.0 compliant port for USB device input or EPSON Parent topic: Technical Specifications...
Page 116: Remote Control Specifications
Remote Control Specifications Reception range Batteries Parent topic: Technical Specifications Projector Dimension Specifications Height (excluding feet) Width Depth Weight Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency Power supply Power consumption (100 to 120 V) Power consumption (220 to 240 V) 19.7 feet (6 m) Two alkaline or manganese AA 3.03 inches (77 mm)
Page 117: Projector Environmental Specifications
For best results, your computer monitor or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Page 118 Display format Refresh rate (in Hz) 60/72/75/85 SVGA 56/60/72/75/85 60/70/75/85 WXGA 60/75/85 WXGA+ 60/75/85 SXGA 70/75/85 60/75/85 60/75/85 SXGA+ 60/75 UXGA WSXGA+* WUXGA (Reduced Blanking) MAC13" MAC16" MAC19" MAC21" Composite video TV (NTSC) TV (PAL) 50/60 TV (SECAM) Component video SDTV (480i) SDTV (576i) SDTV (480p)
Page 119: Usb Display System Requirements
Display format HDTV (720p) HDTV (1080i) HDMI input signals SVGA WXGA SXGA SXGA+ UXGA SDTV (480i/480p) SDTV (576i/576p) HDTV (720p) HDTV (1080i) HDTV (1080p) * Wide resolution only Parent topic: Technical Specifications USB Display System Requirements Your computer system must meet the system requirements here to use the projector's USB Display software.
Page 120 Requirement Windows Operating system Windows 2000 (Service Pack 4 only) Windows XP Professional, Home Edition, and Tablet PC Edition (32-bit); except for Service Pack 1 Windows Vista Ultimate, Enterprise, Business, Home Premium, and Home Basic (32-bit) Windows 7 Ultimate, Enterprise, Professional, and Home Premium (32- and 64-bit);...
Page 121: Notices
Important Safety Instructions FCC Compliance Statement Trademarks Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to information on how to return your products for proper disposal. Parent topic: Notices Important Safety Information Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes.
Page 122 • Do not place the projector on an unstable cart, stand, or table. • Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector more than 30° forward or back. • If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using mounting hardware designed for use with this projector.
Page 123 • You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. Do not use canned air, or the gases may leave a residue. • Do not store the projector outdoors for an extended length of time. •...
Page 124: Restriction Of Use
• Do not disassemble the lamp or subject it to impacts. • Do not place the source of an open flame, such as a lit candle, on or near the projector. • Do not block the lens during projection using a book or any object other than the lens cover. This could damage the projector or cause a fire.
Page 125: Fcc Compliance Statement
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada. Parent topic: Notices Trademarks ® ® EPSON , Instant Off , PowerLite Your Vision is a registered logomark of Seiko Epson Corporation. ® ® , and Quick Corner are registered trademarks, and EPSON Exceed...
Page 126: Copyright Notice
Seiko Epson Corporation. The information contained herein is designed only for use with this EPSON product. Epson is not responsible for any use of this information as applied to other products.
Page 127 1/12 CPD-35515 Parent topic: Copyright Notice...

Epson PowerLite Home Cinema 710HD User Manual

Quick Links

Related Manuals for Epson PowerLite Home Cinema 710HD

Summary of Contents for Epson PowerLite Home Cinema 710HD

Table of Contents