Bulb Replacement - Honda XL1000V Varadero Owner's Manual

Hide thumbs Also See for XL1000V Varadero:
Table of Contents

Advertisement

BULB REPLACEMENT

Refer to the Safety Precautions on page
84.
The light bulb becomes very hot while the
light is ON, and remain hot for a while
after it is turned OFF. Be sure to let it cool
down before servicing.
Do not put finger prints on the headlight
bulb, as they may create hot spots on the
bulb and cause it to break.
Wear clean gloves while replacing the
bulb.
If you touch the bulb with your bare
hands, clean it with a cloth moistened
with alcohol to prevent its early failure.
126
• Be sure to turn the ignition switch OFF
when replacing the bulb.
• Do not use bulbs other than that
specified.
• After installing a new bulb, check that
the light operates properly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents