Basic Operation - Jensen JWM60A Installation And Owner's Manual

BASIC OPERATION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
Power
Press the POWER button (3) to turn the unit on or enter standby mode.
The unit will resume at the last mode (Tuner, Aux, etc.) after turn on.
Volume Control
Rotate the VOL encoder knob control (13) clockwise to increase or counter-
clockwise to decrease the volume output.
The maximum volume setting is "40". While adjusting the volume, the LCD
displays numerical representation of the level.
Audio Menu Setting
Press the AUDIO button (31) to step through the following audio adjustment
options.
Rotate the VOL/ENTER encoder knob control (13) to adjust the selected audio
feature.
Audio Adjustment
BAS: Adjust the Bass level from "-7" to "+7"
Ÿ
TRE: Adjust the treble from "-7" to "+7".
Ÿ
BAL: Adjust the speaker output balance between "L7" (left) and "R7" (right).
Ÿ
"BAL 0" indicates an equal balance between the left and right speakers.
Ÿ FAD: Adjust the speaker fade between "R7" (rear) and "F7" (front). "FAD 0"
indicates and equal balance between the rear and front speakers.
20 22 24 25
21 23
This function will time out after six seconds of inactivity and the unit will
resume normal operation.
Loudness
Press the LOUD button (32) to toggle the loudness function on/off.
Mute
Press the MUTE button (34) to silence the audio output in tuner, CD, DVD, BT, USB
or auxiliary input mode. Press again to restore the previous volume level.
39
38 Liquid Crystal Display (LCD)
37
The liquid crystal display (LCD) panel (1) displays the frequency, time and activated
36
functions.
35
34 Press the BRIGHT UP button to increase the LCD brightness and press the BRIGHT
33
DOWN button to decrease the LCD brightness from "LEVEL 0(off)" to "LEVEL 9"
32
31 (brightest).
30
29
NOTE: When subjected to cold temperatures for an extended period of time,
28
LCD panels will take longer to illuminate and the display visibility may slightly
27
decrease. Optimal LCD operation will return to normal when the temperature
26
increases to a normal range.
System Menu Setting
1.Press the SETTING button (29) to enter the system menu.
2.Press SETTING button or press the |<< or >>| ( 6,35) to choose the following
system menu list:
3.Once the desired menu item appears on the display, adjust that option by rotating
the volume encoder knob clockwise or counter-clockwise within 6 seconds.
4.Press the ENTER knob button to confirm your selection and exit system menu. The
unit will automatically exit the audio menu after 6 seconds of inactivity.
The following items can be adjusted:
Ÿ Beep On/Off: Turn the audible beep On/Off (heard when functions /buttons are
selected).
Note: Beep tone off will not affect the audible tone of the alarm clock.
LCD Brightness : Adjust the brightness of the LCD backlight from "BRI 0" (off) to
Ÿ
"BRI 9" (Brightest)
Region (USA/Europe): Set frequency spacing for various regions.
Ÿ
Setting the Bluetooth
Ÿ Bluetooth (On/Off): Choose "Bluetooth On" or "Bluetooth Off".
Ÿ Bluetooth Device (Locked/Unlocked, Disconnect/Connect, Delete): view, lock
and delete from a list of previously paired mobile device models.
Bluetooth Pair: Press "ENTER" knob to automatically pair a device.
Ÿ
PRESET Volume (PVOL): Select an automatic turn on volume.
Ÿ
Reset
Press ENTER knob button to reset the JWM60A to factory default set up values.
7
JWM60A