Basic Operation - Jensen JWM10A Owner's Manual

BASIC OPERATION

1
2
3
H M
4
5
6
7
10 11
8 9
Power
Press the POWER/MODE button (3) to turn the unit on.
Press and hold the POWER/MODE button (3) to enter standby mode from unit on.
Mode
After unit turn on, press the POWER/MODE button (3) to cycle through available
modes and choose the desired mode.
Volume control
Press the VOLUME to increase the volume output. Press and hold the
M
VOLUME to increase the volume output continuously.
M
Press the VOLUME to decrease the volume output. Press and hold the
H
VOLUME to decrease the volume output continuously.
H
Audio menu setting
Press the AUDIO/SETTING button (4) to choose the following audio menu list:
Audio Adjustment
BAS: Adjust the Bass level from "-7" to "+7".
Ÿ
TRE: Adjust the treble from "-7" to "+7".
Ÿ
BAL: Adjust the speaker output balance between "L7" (left) and "R7" (right).
Ÿ
"BAL 0" indicates an equal balance between the left and right speakers.
Ÿ LOUD: Toggle the loudness on/off. When listening to music at low volumes,
this feature will boost the bass/treble ranges to compensate for the
characteristics of human hearing.
Use the VOLUME / to make adjustments in each menu item.
Ÿ
System menu setting
Press and hold the AUDIO/SETTING button to enter system menu list and press
AUDIO/SETTING once again to choose the following system menu list:
Liquid Crystal Display(LCD)Back Light
13 14 15
Ÿ
NOTE: When subjected to cold temperatures for an extended period of time,
LCD panels will take longer to illuminate and the display visibility may slightly
decrease. Optimal LCD operation will return to normal when the temperature
increases to a normal range.
Sleep Mode
Ÿ
12
Setting the alarm
Ÿ
Ÿ
Setting the Bluetooth
Ÿ
Ÿ
Ÿ
Ÿ
Reset
RESET: Press BAND/ENTER button (7) reset the to factory default settings. This
function will time out after 5 seconds of inactivity and the unit will resume normal
operation.
Auxiliary Input Function
selectable. To connect a portable audio device, insert a standard 3.5mm(audio line
output or headphone output from your portable CD/MP3 iPod or other media) into the
AUX IN connector(6) on the front of the unit or the AUX-IN RCA jack(AUX AUDIO
INPUT) on the rear of the unit.
6
Dimmer: Adjust the brightness of the LCD from "BRI 9" (brightest) to "BRI 0" (off).
Sleep: The Sleep Timer will automatically turn off the JWM10A in the
designated number of minutes. To set the Sleep Time, press To set the
Sleep Time, press VOLUME / repeatedly to change the sleep time from
0(off),15,30.45 or 60 minutes.
Alarm ON/OFF: Press VOLUME / to turn on and off the alarm. The "ALARM"
icon will show on the display.
Press the VOLUME button (2) to adjust the hour or press the VOLUME
H
button (1) to adjust the minute.
BT ON/OFF: Press the VOLUME /
function
BT DEV (Locked/Unlocked, Disconnect/Connect, Delete) :View, lock and delete
from a list of previously paired mobile device models.
BT PAIR: Press BAND/ENTER (7) to start pairing with a Bluetooth enabled
device.
Preset Volume (PVOL): Select an automatic turn on volume.
When a portable audio device is connected to the unit, press the
POWER/MODE button(3) repeatedly until AUX 1/ AUX 2 mode is
JWM10A
M
button to turn on and off the Bluetooth