Document Feeder Installation; Accessory Check - Ricoh FT4430 Service Manual

April '88
16

DOCUMENT FEEDER INSTALLATION

1•

Accessory Check

Check the quantity and condition of the accessories in the box according to
the following list:
1. Installation procedure
(115V - English only/220V - five languages)
2. New Equipment Condition Report
3. Envelop - NECR(115V only)
4. Original exit guide
5. Flip scale
6. Flip scale spring
7. Flathead shoulder screw
8. Original feed table
9. Original table cover
10. DF interface harness
11. Nylon harness bushing
12. Test chart A4
13. Flathead screw - M4 x 6
14. Ground screw
15. Toothed washer
16. Pan head screw - M4 x 6
17. Pan head screw with washer - M4 x 6
18. Pan head screw - M5 x 12
19. Multilingual decals (220/240V only)
20. Ty-wrap
Interface PCB type E is also required to install the DF.
Check the accessories according to the following list.
Interface PCB Type E box:
PCB Mounting Stud
1.
NOTE: - The interface PCB is not necessary with the A024-I 7 and A024-27
version machines (already equipped at the production line).
- This is not necessary if a sorter is already installed in the machine.
- The exposure glass holders are enclosed with a copier.
2
.
7-14