Adjusting Picture Settings - Insignia NS-PDP42 User Manual

Insignia NS-PDP42/50-09 42" and 50" Plasma TV

Adjusting picture settings

Setting the picture size (aspect ratio)
This feature lets you choose the way an analog
picture with a 4:3 aspect ratio is displayed on
your TV.
The RGB-PC input source uses 4:3 or 16:9
aspect ratio.
Caution
If a fixed image is displayed on the screen for an
extended period of time, the image could become
imprinted on the screen and remain visible.
This phenomenon is common to all manufacturers
and is not covered by warranty.
After watching video that does not fill the screen,
an after-image from the black bars normally
dissipates after a few minutes.
Choices include:
• Set by program—Selects the correct
picture proportion to match the source's
image.
• 4:3—Choose this when you want to view
a picture with the original 4:3 aspect ratio.
• 16:9—Adjusts the picture horizontally to
fill the entire screen.
• Zoom 1—Choose this when you want to
view the picture without any alteration.
However, the top and bottom portions of
the picture are cropped.
• Zoom 2—Choose this when you want the
picture to be altered, both vertically
extended and cropped.
• Just Scan—Provides the best picture
quality without loss of original picture in
high-resolution image. Just Scan only
works with the following input sources:
• TV
• CADTV
• Component
• HDMI-DTV
• DVI-DTV (720p/1080i/1080p)
To directly select the aspect ratio:
1 Press RATIO on the remote control
repeatedly to cycle through the various
aspect ratios.
2 When you have made your selection, press
RETURN to resume normal viewing.
To select the aspect ratio from the Q.MENU:
1 Press Q.MENU on the remote control. The
Q.MENU opens.
2 Press
3 Press
Selecting preset picture settings
To directly select the preset picture settings:
1 Press PICTURE on the remote control
2 When you have made your selection, press
To select the aspect ratio from the Q.MENU:
1 Press Q.MENU on the remote control. The
2 Press
3 Press
Selecting preset color settings
You can choose one of three preset color
adjustments.
To set the color temperature:
1 Press MENU on the remote control, then
2 Press ENTER to enter the PICTURE menu.
3 Press
www.insignia-products.com
or to select Aspect Ratio, then
press or to cycle through the various
aspect ratios.
or to select Close, then press
ENTER to return to normal viewing.
repeatedly to cycle through the various
presets. Choices include Vivid, Standard,
Cinema, Sport, Game, Expert1, and
Expert2.
RETURN to resume normal viewing.
Q.MENU opens.
or to select Picture Mode, then
press or to cycle through the various
presets. Choices include Vivid, Standard,
Cinema, Sport, Game, Expert1, and
Expert2.
or to select Close, then press
ENTER to return to normal viewing.
press or or or
PICTURE. The PICTURE menu opens.
or to select Picture Mode, then
press ENTER.
to select
21