Replacing The Internal Storage Drive - Lenovo ThinkPad E570 User Manual

6. Insert the new memory module into the memory slot at an angle of about 20 degrees
memory module downward until it snaps into place
in the memory slot and cannot be moved easily.
Note: If only one memory module is installed in the computer, ensure that it is seated in the upper slot
(the in which the memory module is installed as shown in the following illustration).
7. Reinstall the bottom cover. See "Replacing the bottom cover" on page 83.
8. Reinstall the removable battery. See "Replacing the removable battery" on page 77.
9. Turn the computer over. Connect the ac power adapter and all cables to the computer.

Replacing the internal storage drive

Before you start, read "Important safety information" on page v and print the following instructions.
Attention: The internal storage drive (such as hard disk drive, solid-state drive, or hybrid drive) is sensitive.
Inappropriate handling might cause damage and permanent loss of data.
When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed
for frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
To replace the internal storage drive, do the following:
1. Ensure that the computer is turned off and disconnected from ac power and all cables.
2. Close the computer display and turn the computer over.
3. Remove the removable battery. See "Replacing the removable battery" on page 77.
4. Remove the bottom cover. See "Replacing the bottom cover" on page 83.
2 . Ensure that the memory module is firmly installed
Chapter 9
1 . Pivot the
87
.
Replacing devices