6. Insert the flat-head screwdriver into the sides of the keyboard as shown to push the keyboard frame
backward. Ensure that there is no gap between the keyboard frame and keyboard bezel.
Note: Do not press and hold the keys while sliding the keyboard frame, otherwise the keyboard frame
cannot be moved.
7. Reinstall the rubber caps.
8. Reinstall the battery. See "Replacing the battery" on page 113.
9. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the internal storage drive
Before you start, print these instructions and read "Important safety information" on page iv.
Attention: The internal storage drive (such as a hard disk drive, solid-state drive, or hybrid drive) is very
sensitive. Incorrect handling can cause damage and permanent loss of data. Observe the following
guidelines:
• Replace the storage drive only if you upgrade it or have it repaired. The connectors and slot of the storage
drive are not designed for frequent changes or drive swapping.
.
Chapter 10
Replacing devices
125