4 Use your TV
This section helps you perform basic TV operations.
Switch your TV on/off or to
standby
To switch on
•
If the standby indicator is off, press
POWER at the side of the TV.
•
If the standby indicator is red, press
( Standby-On ) on the remote control.
To switch to standby
•
Press
( Standby-On ) on the remote control.
»
The standby indicator switches to red.
To switch off
•
Press
POWER at the side of the TV.
»
The standby indicator switches off.
Tip
•
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
8
EN
Switch channels
•
Press
(
/
control to return to the previously
viewed channel.
•
Press
on the remote control or
P/CH +/- on the side of the TV.
•
Press
to use the channel grid.
•
Enter a channel number using the
Numeric buttons .
Note
•
When you use a favourite list, you can only
select those channels in the list (see 'Select a
favourite list' on page 15 ) .
) on the remote