Installing The Stands; Lifting The Tv Set; Installing The Batteries - Philips 75PFL5704 User Manual

Installing the stands

1 Fasten the matching stand to the TV with 2 screws (included).
2
Fasten the other stand to the TV with 2 screws (included).
3
Both stands should now be securely fastened.
4
Remove the plastic bag.
Note(s)
A wide open space is recommended for assembly.
●
A Phillips-head screwdriver is required to fasten the stands to the TV set.
●
When attaching the stand, ensure that all screws are tightly fastened. If the
●
stand is not properly attached, it could cause the unit to fall, resulting in
injuries as well as damage to the unit.
To remove the stand from this unit, unscrew the phillips-head screws by
●
reversing the procedure. Be careful not to drop the stand when you remove
it.
2 screws
required
2 screws
required

Lifting the TV set

Carefully lift the TV set as shown in the illustration and place it onto a
stable, level surface.

Installing the Batteries

a b
1
Open the battery cover by firmly sliding down.
2
Insert 2 AAA (1.5 V) batteries matching the polarity indicated inside
battery compartment of the remote.
3
Slide the cover back into position.
Caution(s)
For remote that have the battery cover on the front, please take care to slide
●
the cover down BEFORE lifting it off to prevent accidentally breaking the
tabs that hold it in place.
Note(s)
Remove the batteries if not using the remote for an extended period of time.
●
10
c
AAA (1.5 V) x 2
Continued on next page.
.
English