Table of Contents
Advertisement
Watch video from a USB device
1
In the USB content browser, press
enter the [VIDEO] folder.
2
Press
to select a video.
3
Press
to play the video.
Use Scenea to display a
picture as TV wallpaper
You can use the Scenea feature to display a still
picture as wallpaper on your TV. This feature is
for home mode only.
Activate Scenea
Single-picture wallpaper
Press
on your remote control.
»
The default or pre-loaded picture is
displayed.
Note
•
To deactivate the wallpaper, press any remote
control button except
).
•
The wallpaper is also deactivated when you
connect a USB storage device to the TV or
start an EasyLink-compliant device through
one-touch play.
Walllpaper slide show
Make sure the wallpaper is not yet activated.
1
Connect a USB storage device to the TV.
2
Press
.
»
All pictures in the USB storage device
are displayed.
to
, (
), and
(
Note
•
The wallpaper display duration is determined
by the pre-deÀ ned sleeptimer settings (see
'Automatically switch the TV to standby
(sleeptimer)' on page 16 ) . When sleeptimer is
off, the wallpaper is displayed for a maximum
of 120 minutes.
Upload a wallpaper picture from a
USB device
Before performing this procedure, be sure to
have available a USB storage device containing
the picture you intend to use as wallpaper.
1
Connect the USB storage device to the
TV.
2
Press
( Home ).
EN
19
Advertisement
Table of Contents
