Lexus LS500 Quick Manual page 96

96
3-4. Setup
3
Select the desired category to be
changed.
"Default": Select to set the default catego-
ries.
4
Select the desired POI category.
"List All Categories": Select to display all
POI categories.
5
Select the desired POI icon.
6
Select "OK".
Current position/Tire change
calibration
The current position mark can be
adjusted manually. Miscalculation of
the distance caused by tire replace-
ment can also be adjusted.
1
Display the detailed navigation set-
tings screen:
 "MENU" button → "Setup" →
"Navigation" → "Detailed Navi. Set-
tings"
2 Select "Calibration".
3 Select the desired item.
 For additional information on the
accuracy of a current position:
→P.102
Position/Direction calibration
When driving, the current position
LS500_LS500h_Navi_OM50F66U_(U)
mark will be automatically corrected
by GPS signals. If GPS reception is
poor due to location, the current posi-
tion mark can be adjusted manually.
1
Select "Position/Direction".
2 Scroll the map to the desired point
(→P.65) and select "OK".
3 Select an arrow to adjust the direc-
tion of the current position mark
and select "OK".
Tire change calibration
The tire change calibration function will
be used when replacing the tires. This
function will adjust miscalculation
caused by the circumference differ-
ence between the old and new tires.
1 Select "Tire Change".
 The message appears and the quick
distance calibration starts automati-
cally.
● If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.