Lexus LS500 Quick Manual page 288

288
7-2. Panoramic view monitor
lowing.
Panoramic view display (including magnified display), Side Clearance View
and Cornering View display
Since the panoramic view, Side Clearance View and Cornering View process and
display images based on flat road surfaces, it cannot depict the position of
three-dimension objects (such as vehicle bumpers, etc.) that are in positions higher
than the surface of the road. For example, even though it appears that there is
space between the bumpers of the two vehicles in the illustration below and they
are not likely to collide, in reality, a collision is about to occur.
WARNING
● When a sensor indicator on the intuitive parking assist display illuminates in red or a
buzzer sounds continuously, be sure to check the area around the vehicle immediately
and do not proceed any further until safety has been ensured, otherwise an unex-
pected accident may occur.
When approaching three-dimensional objects
The estimated course lines target flat surfaced objects (such as the road). It is not
possible to determine the position of three-dimensional objects (such as vehicles)
using the estimated course lines and distance guide lines. When approaching a
three-dimensional object that extends outward (such as the flatbed of a truck), be
careful of the following.
LS500_LS500h_Navi_OM50F66U_(U)