Lexus LS500 Quick Manual page 131

nect to the Bluetooth
• The sound may cut out.
● It may take time to connect the phone
when Bluetooth
● For operating the portable player, see the
instruction manual that comes with it.
If the Bluetooth
●
due to poor reception from the
®
Bluetooth network when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode <ON
mode>, the system automatically recon-
nects the portable player.
®
Bluetooth device information is regis-
●
tered when the Bluetooth
connected to the Bluetooth
tem. When selling or disposing of the
vehicle, remove the Bluetooth
information from the system. (→P.56)
● In some situations, sound output via the
®
Bluetooth audio system may be out of
sync with the connected device or output
intermittently.
WARNING
Do not operate the player's controls or
●
connect to the Bluetooth
tem while driving.
Your audio unit is fitted with
●
®
Bluetooth antennas. People with
implantable cardiac pacemakers, car-
diac resynchronization therapy-pace-
makers or implantable cardioverter
defibrillators should maintain a reason-
able distance between themselves and
®
the Bluetooth
waves may affect the operation of such
devices.
LS500_LS500h_Navi_OM50F66U_(U)
®
device.
®
audio is being played.
®
device is disconnected
®
device is
®
audio sys-
®
audio
®
audio sys-
antennas. The radio
4-3. Media operation
● Before using Bluetooth
users of any electrical medical device
other than implantable cardiac pace-
makers, cardiac resynchronization
therapy-pacemakers or implantable
cardioverter defibrillators should con-
sult the manufacturer of the device for
information about its operation under
the influence of radio waves. Radio
waves could have unexpected effects
on the operation of such medical
devices.
NOTICE
Do not leave your portable player in
●
the vehicle. In particular, high tempera-
tures inside the vehicle may damage
the portable player.
Connecting a Bluetooth
device
®
To use the Bluetooth audio system, it
is necessary to register a Bluetooth
device with the system.
Registering an additional device

1
Press the "MENU" button on the
Remote Touch.
2 Select "Setup".
*
3 Select "Bluetooth " on the sub
menu.
* ®
: The Bluetooth word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select "Add New Device".
5 For more information: →P.44
Selecting a registered device

1 Select "Connect" on the sub menu.
2 Select the device to be connected.
131
®
devices,
4
®
®