266
7-2. Panoramic view monitor
mated course line mode. (→P.266)
Automatic display button
E
Select to turn automatic display mode on/off. The indicator on the button illuminates during
automatic display mode. (→P.267)
Front Cross Traffic Alert*
F
When a sensor detects an approaching vehicle or obstacle, the direction of approaching
vehicle or obstacle is displayed.
Pre-Collision System & Parking Support Brake*
G
When the system determines that the possibility of a frontal collision with a detected object
is high, a warning message is displayed.
*
: If equipped
●
Pressing the camera switch changes the screen to the Side Clearance View & panoramic
view screen or previously displayed screen, such as the navigation screen.
●
For details about the intuitive parking assist, Front Cross Traffic Alert function and
Pre-Collision System & Parking Support Brake function, refer to the "OWNER'S MAN-
UAL".
WARNING
●
When a sensor indicator on the intuitive parking assist display illuminates in red or a
buzzer sounds continuously, be sure to check the area around the vehicle immediately
and do not proceed any further until safety has been ensured, otherwise an unex-
pected accident may occur.
●
As the intuitive parking assist display and Front Cross Traffic Alert display are displayed
over the camera view, it may be difficult to see the intuitive parking assist display and
Front Cross Traffic Alert display depending on the color and brightness of the sur-
rounding area.
Switching the guide line mode
Each time the guide line switching but-
ton is selected, the mode will change as
follows:
LS500_LS500h_Navi_OM50F66U_(U)
Distance guide line
Only the distance guide lines are
displayed.