Samsung RZ32M User Manual page 60

Maintenance
Slim Ice Maker (applicable models only)
NOTE
• When cleaning the component parts of the Slim Ice Maker such as the water bin, ice
bucket, and ice template, make sure they are completely dry after cleaning.
• When cleaning the Slim Ice Maker unit, make sure to completely dry the inner and outer
parts of the unit after cleaning. Incomplete dryness may cause the ice maker lever to
fail. In this case, dry the Slim Ice Maker completely for 2-3 days. Then, try again.
To remove the component parts
60 English
Untitled-51 60
Water bin
Fully open the water bin, and then pull out.
Ice template
1. Open the ice template cover to reveal
the ice template.
2. Slightly pull out the left side of the ice
template, and then pull out the other
side to remove.
2017-03-09 5:07:52