Samsung RZ32M User Manual page 38

Operations
To dispense ice manually
38 English
Untitled-51 38
1. Pull up the handle of the water bin (01)
to open, and then fill the bin with water
up to the max line. Gently close the bin
so that water does not drop or leak.
CAUTION
• Do not exceed the max line. Excessive
water causes the ice to jam and not
dispense well.
• Use only potable water. Other liquids,
such as green tea or milk may not
dispense well.
• Gently close the water bin. Otherwise,
the water may drop or leak.
NOTE
• If you encounter a water leak, open the
water bin and check if the water bin's
passage to the ice template is frozen. If
this is the case, pour lukewarm water
into the water bin up to the max line.
Let the passage melt.
• It is recommended to clean the water
bin's passage to the ice template on a
regular basis because the passage is
likely to freeze.
2. Check if the ice freezes completely. Only
when the ice has frozen completely, pull
up the ice maker lever (02). Then, the ice
template (04) rotates and dispenses ice
to the ice bucket (03).
CAUTION
• Do not pull up the lever until the ice has
frozen completely. Half-frozen ice may
jam and damage the ice bucket.
2017-03-09 5:07:45