Table of Contents
Advertisement
Administering Alarm Reporter
Dn List Pane
Sort Dn List
Refresh Dn List
CCM3.1
Alarm Reporter
All the directory numbers for the selected configuration are displayed within
the Dn List pane, as well as the Device Type, i.e. Agents, Trunks groups
etc. There are four icons to symbolise each device type, as shown below.
- Agents
- Agent Groups
The directory numbers can be viewed in four modes as shown below. The
default setting is Details. Click the required view button to change the
setting
– Details
– List
The directory number information can be sorted in ascending or
descending order. If the directory numbers are displayed in Details View
mode, click the column title to change the sort to either ascending or
descending order.
You can also sort the information by:
1. Choose Sort DN List from the Options Menu. You could also click the
Sort button
on the toolbar.
2. From the Sort Dn List screen, select the required Sort By option. You
can sort by Dn, Name or Device Type.
3. Select the Sort Direction, i.e. Ascending or Descending and click OK.
To receive updated alarm information for the selected directory numbers,
you need to refresh the information. To do this:
Select Refresh from the Reports Menu or click on the Refresh button
- Trunks
- Trunk Groups
– Small Icons;
– Large Icons
38DHB0002UKEL Issue 3 (18/07/2002)
Dn List Pane
.
Page 7
Advertisement
Table of Contents
