Fluke AirCheck User Manual page 60

AirCheck Wi-Fi Tester
Users Manual
A
B
C
D
E
F
Figure 16. Probing Client Details Screen
A
The MAC address of the client.
B
Last probe detected: The time since the last probe was
detected. After 120 seconds, the units change to
minutes. After 120 minutes, the units change to hours.
C
The channel the client used for the last probe, and the
signal strength of the last probe.
D
Detected on: A list of channels that the client probes. To
scroll through the list, press
52
G H
) *
(
E
SSIDs the client uses in probes.
F
Scanning: The percentage of the available channels that
have been monitored for clients. The tester continues to
do a scan through all channels after the bar graph is at
100%.
G
: The channel the tester currently monitors. The
color of the bars shows the status of the country code
for the regulatory domain. See "802.11d Operation" on
page 20
H
: The number of access points the tester hears at
your location. This number does not include virtual
access points if Group virtual access points is selected.
See page 18.
ffy11.eps