Fluke AirCheck User Manual page 63

• To move the cursor in the filename, highlight the
filename, then press
5 To rename the file with the name you made, press
%
Done, then press
To delete a file
1 Select Tools, then select Manage files.
2 Select Delete file.
3 Highlight a file, then press
%
4 Press Delete.
If you delete or rename a file that the tester must
have to operate the tester will recreate the file the
next time you turn on the tester. This does not
occur for profiles you created, session files you
saved, or for the file OUI_ABBR.TXT. See "About
Files on the Tester" on page 56".
) *
.
(
Rename.
#
.
Note
To see how much space is available in memory
Use the USB cable supplied with the tester to connect the
%
tester to the PC, then use one of these procedures:
•
Start AirCheck Manager, select Tools > Profile Manager,
then look at the Memory Used graph.
•
Use the file browser in the PC operating system to see
how much memory space is available on the tester.
If memory is full, the tester shows Memory full when you try
to save a file.
Manage Files on the Tester
55