ProCurve 2626 Management And Configuration Manual page 159

Figure 9-8. Example of Disabling Time Synchronization by Disabling the SNTP Mode
Figure 9-7. Example of SNTP with Time Sychronization Disabled
Disabling the SNTP Mode. If you want to prevent SNTP from being used
even if selected by
timesync
eter), configure the SNTP mode as disabled.
Syntax: no sntp
Disables SNTP by changing the SNTP mode
configuration to
For example, if the switch is running SNTP in Unicast mode with an SNTP
server at 10.28.227.141 and a server version of 3 (the default),
the SNTP configuration as shown below, and disables time synchronization
on the switch.
SNTP: Viewing, Selecting, and Configuring
(or the Menu interface's
.
Disabled
Even though the Time Sync Mode is set to
time synchronization s disabled because i
sntp has disabled the SNTP Mode parameter.
Time Protocols
param­
Time Sync Method
changes
no sntp
Sntp,
no
9-13