Cli: Viewing Port Status And Configuring Port Parameters - ProCurve 2626 Management And Configuration Manual

N o t e
Using the Menu To Configure Ports.
The menu interface uses the same screen for configuring both individual ports
and port trunk groups. For information on port trunk groups, see Chapter 12,
"Port Trunking" .
1. From the Main Menu, Select:
2. Switch Configuration...
2. Port/Trunk Settings
Figure 10-2. Example of Port/Trunk Settings with a Trunk Group Configured
(for Edit). The cursor moves to the Enabled field for the first port.
2. Press [E]
3. Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
, then press
[Enter]
CLI: Viewing Port Status and Configuring Port
Parameters
Port Status and Configuration Commands
show interfaces brief
show interfaces config
interface
show spanning tree
Viewing Port Status and Configuring Port Parameters
(for Save).
[S]
below
page 10-9
page 10-10
page 10-10
Port Status and Basic Configuration
10-7