Switch Software Downloads - ProCurve 2626 Management And Configuration Manual

Switch Memory and Configuration
Using Primary and Secondary Flash Image Options
1. In this example show
version indicates the
switch has version G.05.01
in primary flash .
2. After the boot system
command, show version
indi cates that version
G.05.00 is n secondary i
flash.
Figure 6-9. Determining the Software Version in Primary and Secondary Flash
6-14

Switch Software Downloads

The following table shows the switch's options for downloading a software
version to flash and booting the switch from flash
Table 6-1. Primary/Secondary Memory Access
Action
Download to Primary
Download to Secondary
Boot from Primary
Boot from Secondary
The different software download options involve different copy commands,
plus , and . These topics are covered in Appendix A, "File Transfers".
xmodem tftp
Download Interruptions. In most cases, if a power failure or other cause
interrupts a flash image download, the switch reboots with the image previ­
ously stored in primary flash. In the unlikely event that the primary image is
corrupted, as a result of an interruption, the switch will reboot from secondary
flash and you can either copy the secondary image into primary or download
another image to primary from an external source. See Appendix A, "File
Transfers".
Menu CLI
Yes Yes
No Yes
Yes Yes
No Yes
Web SNMP
Browser
Yes Yes
No Yes
Yes Yes
No Yes