Advertisement
(superscript: To change the transmitting frequency, change the TONE/PULSE
switch position to TONE side and them press the PAGE button during the
unit is set the TX Test mode, so that the channel is changed from CH 19
to CH 20. Every pressing the CHANNEL key, channel is changed as below.)
(superscript: 19 20 21 40 1 2 3 - - - 39 40 1 2 3 4 ---)
(superscript: To cancel the test mode, place the Handset in the Base
Unit, so that the STATUS LED lights and the equipment is set for normal
operation mode (Standby mode).)
(superscript: Or, disconnect the AC Adapter and connect it again, so that
the test mode is easily canceled.)
(superscript: Test Mode for Handset)
(superscript: First, disconnect the battery pack. Then, connect the
battery pack again while pressing # and * keys. When test mode is set
up, long beep tone is heard and the TALK LED lights. The unit is set for
CH 21 Transmitting mode. Every pressing the CHANNEL key, channel is
changed as below.)
(superscript: 21 20 19 40 1 2 3 - - - 39 40 1 2 3
4 ---)
(superscript: To cancel the test mode, press the TALK key.)
RADIOSHACK
CARE AND MAINTENANCE:
Modifying or tampering with 43-1107A internal components can cause a
malfunction and might invalidate its warranty and void your FCC
authorization to operate it. If your 43-1107A is not performing as it
should, take, it to your local RadioShack store for assistance. If the
trouble is affecting the telephone line, the phone company can ask you to
disconnect your 43-1107A until you have resolved the problem.
20
Advertisement
