HP 4320t Maintenance And Service Manual page 73

Mobile thin client

Hide thumbs Also See for 4320t:

Table of Contents

Peel back the tape (1) that secures the display cable to the display panel, and then release the

ZIF connector (2). Remove the cable from the display panel connector (3).

NOTE:

The display cable includes the microphone.

Remove the display panel.

10.

If it is necessary to replace the display brackets, remove the four PM2.0×3.0 screws (1) that

secure the display brackets to the display panel, and then remove the display brackets (2).

Component replacement procedures

Table of Contents