Wired Remote Control Installation - LG LM-4462C2T Service Manual

WIRED REMOTE CONTROL INSTALLATION

DISASSEMBLING
Front case
Lever carefully
the box open
using a screw
driver, etc.
• Fix the under plate on the wall
Face of wall
Under plate
Screw (accessory)
ELECTRICAL WIRING
REMOTE CONTROL PREPARATION(OPTIONAL)
HOW TO MOUNT ON A WALL
HOW TO INSERT BATTERIES HOW TO INSERT BATTERIES
Remove the battery cover from the remote con-
troller.
• Pull out the cover according to the arrow direction.
Insert the two batteries.
• Be sure that the (+) and (-) directions are correct.
• Be sure that both batteries are new.
Re-attach the cover.
• Slide it back into position.
Remote control
box body
(Main board)
CN REMO
Make sure that wire and teminal
numbers are matched on unit side and
The maximum length of the cord is 100m.
If the length of the cord exceeds 50m,
use a wire size greater than 0.5mm
• Separate the under plate from Remote control box.
• Fix the cord clamps on the wall by ø 3 tapping
screws (accessory).
• Fix the remote control cord.
remote controller side.
2
.
–18–
Remote controller
• Do not use rechargeable batteries,
such batteries different from standard
dry cells in shape, dimensions, and
performance.
• Remove the batteries from the remote
controller if the air conditioner is not
going to be used for long time.
Cord clamp
(accessory)