Wired Remote Control Installation; Remote Control Preparation; How To Insert Batteries - LG Air Conditioner Installation Manual

Remote Controller Installation

Wired Remote Control Installation

DISASSEMBLING
Front case
Lever carefully
the box open
using a screw
driver, etc.
• Fix the under plate on the wall
Face of wall
Under plate
Screw (accessory)
ELECTRICAL WIRING
(Main board)
CN REMO

Remote Control Preparation

HOW TO MOUNT ONTO A WALL

HOW TO INSERT BATTERIES

Remove the battery cover from the remote
controller.
• Slide the cover according to the arrow
direction.
Insert the two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
Re-attach the cover.
• Slide it back into position.
10 Cassette type Air Conditioner
Remote control
box body
Wire and make sure that terminal
numbers are matched on unit side and
remote controller side.
The maximum length of the cord is 100m(328ft).
If the length of the cord exceeds 50m(164ft),
use a wire size greater than 0.5mm
• Separate the under plate from Remote control box.
• Fix the cord clamps on the wall by
ø 3 tapping screws (accessory).
• Fix the remote control cord.
Remote controller
2
.
• Do not use rechargeable batteries,
such batteries differ from standard
dry cells in shape, dimensions, and
performance.
• Romove the batteries from the
remote controller if the air
conditioner is not going to be used
for some long time.
Cord clamp
(accessory)