Aca - Hughes 9350 User Manual

ACA

This web page allows you to use Automatic Context Activation (ACA) in two different ways;
using static IP addresses in the TE device you can establish an automatic PDP context with
any QoS that is offered by the network (upper half of the web page)or using DHCP from the
UT, you can establish an automatic background PDP context for any TE that connects to the
UT (lower part of the web page).
ACA settings for TEs with Static IP address:
Previously the static IP addresses used for ACA used specific blocks of IP addresses for the
various QoS types. Now you can setup your own range of static IP addresses for setting up
an automatic PDP context with any of the QoS's offered by the network.
To turn on a particular range of addresses, select the "On" radio button and choose a range
of addresses, low and high to use (e.g. 192.168.128.1 to 192.168.128.10).
Next select the desired QoS for that range of IP addresses (32K streaming). The APN listed is
the default APN read from the USIM card (bgan.inmarsat.com). If your USIM is provisioned
for more than one APN, then you can type a secondary APN in this field.
Next, if your Service Provider requires a UN and PW, enter it in the next two fields.
If you want to setup additional ranges of addresses, please follow the same instructions as
above. Note: You cannot overlap the IP address ranges. If you do, an error will pop-up
telling you that you have an overlap region. Check all of the ranges for overlaps and try
again.
22
Hughes 9350 BGAN Terminal User Guide