Security; Lock; Unlock Value; Language - Siemens SITRANS LR260 Operating Instructions Manual

6. Security

6.1. Lock

Note:
• Do not lose this number value.
• This lock affects only the handheld programmer. A remote master can change
configuration if Communication Control is set to allow this.
Prevents any changes to parameters via the handheld programmer.
Handheld
programmer
Values
Related
parameter
To secure the programming lock: Key in any value other than the unlock value.
Parameters are now locked and cannot be changed.
To unlock the device and enable handheld programming changes: Key in the unlock
value. Parameters are now unlocked and may be changed.

6.2. Unlock value

Notes:
• Default setting for 6. 1 (Lock) is Unlocked.
• After a new value is stored in Unlock Value (6.2), that value will be recalled
after a reset to Factory Defaults.
• Consult your Siemens Milltronics representative if you have forgotten the
unlock value.
Stores the value to be entered in 6.1. Lock to unlock programming. If Lock is on,
Unlock Value will not display the unlocked value
Handheld
programmer
Values

7. Language

Selects the language to be used on the LCD.
Options
7ML19985KE03
Range: 1 to 9999
* 1954 (unlock value)
Any other value
Unlock value (6.2.)
Range: 1 to 9999
Factory Default: 1954
– – – –
* English
German
French
Spanish
SITRANS LR260 (HART) – INSTRUCTION MANUAL
Off (enables local programming)
On (disables local programming)
Display when Lock is on
Page 81