Mapping To Multiple Monitors - Wacom Bamboo One User Manual

MAPPING TO MULTIPLE MONITORS

If your computer has more than one monitor, Bamboo One will map to your monitors based upon how they
are configured in the D
monitor mode, the tablet will map to all monitors as if they were one large display. If the monitors are in
mirror mode, the tablet will map to the entire space on each monitor and the screen cursor will be
displayed on each monitor simultaneously.
See your hardware and operating system documentation for details on configuring your computer and
operating system for use with multiple monitors.
PORTION OF SCREEN AREA
The tracking options in the P
screen your tablet will map to:
• A S . Maps the entire monitor(s) area. This is the default setting.
LL CREENS
• M . Maps the entire area of a single monitor that you choose.
ONITOR
• P . Allows you to select a portion of the display for tablet to screen mapping. Click S
ORTION
the P S
ORTION OF CREEN
Choose a method for defining a portion of
the display:
• Drag corners of the foreground graphic
to select the screen area.
• Move the screen cursor to select the
screen area. Select the C
button. As you define
SCREEN AREA
P S
ORTION OF CREEN
prompts to set the portion of your
display screen that will be used for
mapping.
After defining a portion of the screen, you
may need to use a different input device to
access other portions of the screen area.
Contents
P control panel. If A
ISPLAY ROPERTIES
M D
EN ODE ETAILS
dialog box.
LICK TO DEFINE
, follow any M
ESSAGE
Contents
Index
S
LL CREENS
dialog box allow you to define which portion of the display
Index
is selected and you are in extended
26
... to open
ET
26