Replacing The Pen Tip - Wacom Bamboo One User Manual

CARING FOR YOUR TABLET AND PEN
Keep your Bamboo One pen and tablet surface clean. Dust and dirt particles can stick to your pen and
cause excessive wear to the tablet surface. Regular cleaning with a soft, damp cloth will help to prolong
the life of your tablet surface and pen; you can also dampen the cloth using a very mild soap diluted with
water. Do not use volatile liquids, such as paint thinner or benzene, as they may damage the plastic case.
Keep your tablet and pen in a clean, dry place and avoid extremes in temperature. Room temperature is
best. Also, your pen and tablet are not made to come apart. Twisting the pen case can break the pen.
Taking apart the product will void your warranty.
Important: Take care to never spill liquids onto the tablet or pen. Be especially careful of getting the
pen buttons and tip wet – they contain sensitive electronic parts that will fail if liquid enters them.

REPLACING THE PEN TIP

The pen tip (nib) will wear with normal use. Replace the pen nib when it gets too short – less than 1 mm
(.04 inch) – or develops a flat point.
Clasp the old nib with a tweezer, needle-nosed pliers, or similar instrument and pull it straight out of the
pen. Then slide the end of the new nib straight into the barrel of the pen – firmly push the nib until it stops.
1 mm (.04 inch) or less)
Pen nib
Available as optional spare part.
See ordering parts and
Warning: Prevent children from swallowing the pen tip or pen buttons. The pen tip (nib) or pen
buttons may accidentally be pulled out if children are biting on them.
To order replacement parts, see
Contents
accessories.
Important: When the Bamboo One pen is not in use, place it on the
pen rest or lay it flat on your desk. To maintain the sensitivity of your
pen, do not store the pen in a container where it will rest on the tip.
ordering parts and
Contents
Index
accessories.
Index
40
40