Information Center Configuration Task List; Outputting System Information To The Console - HP MSR Series Configuration Manual

Hardware
MSR50
MSR1000

Information center configuration task list

Task

Outputting system information to the console

Outputting system information to the monitor terminal
Outputting system information to a log host
Outputting system information to the trap buffer
Outputting system information to the log buffer
Outputting system information to the SNMP module
Outputting system information to the Web interface
Saving system information to a log file
Managing security logs
Enabling synchronous information output
Disabling an interface from generating link up/down logging information
Configurations for the information output destinations function independently.
Outputting system information to the console
Step
1. Enter system view.
2. Enable the information center.
3. Name the channel with a
specified channel number.
4. Configure an output channel
for the console.
5. Configure an output rule for
the console.
FIPS mode
Yes.
Yes.
Command
system-view
info-center enable
info-center channel
channel-number name
channel-name
info-center console channel
{ channel-number |
channel-name }
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
182
Remarks
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Remarks
N/A
Optional.
Enabled by default.
Optional.
See Table 6 for default channel
names.
Optional.
By default, system information is
output to the console through
channel 0 (console).
Optional.
See "Default output rules of system
information."