HP MSR Series Configuration Manual page 81

[DeviceB-Ethernet1/2] port trunk permit vlan 10
[DeviceB-Ethernet1/2] quit
[DeviceB] interface ethernet 1/3
[DeviceB-Ethernet1/3] port link-type trunk
[DeviceB-Ethernet1/3] port trunk permit vlan 10
[DeviceB-Ethernet1/3] quit
# Enable the cluster function.
[DeviceB] cluster enable
# Configure a private IP address range for the member devices, which is from 172.16.0.1 to
172.16.0.7.
[DeviceB] cluster
[DeviceB-cluster] ip-pool 172.16.0.1 255.255.255.248
# Configure the current device as the management device, and establish a cluster named abc.
[DeviceB-cluster] build abc
Restore topology from local flash file,for there is no base topology.
(Please confirm in 30 seconds, default No). (Y/N)
N
# Enable management VLAN auto-negotiation.
[abc_0.DeviceB-cluster] management-vlan synchronization enable
# Configure the holdtime of the member device information as 100 seconds.
[abc_0.DeviceB-cluster] holdtime 100
# Configure the interval to send handshake packets as 10 seconds.
[abc_0.DeviceB-cluster] timer 10
# Configure the FTP Server, TFTP Server, Log host and SNMP host for the cluster.
[abc_0.DeviceB-cluster] ftp-server 63.172.55.1
[abc_0.DeviceB-cluster] tftp-server 63.172.55.1
[abc_0.DeviceB-cluster] logging-host 69.172.55.4
[abc_0.DeviceB-cluster] snmp-host 69.172.55.4
# Add the device whose MAC address is 00E0-FC01-0013 to the blacklist.
[abc_0.DeviceB-cluster] black-list add-mac 00e0-fc01-0013
[abc_0.DeviceB-cluster] quit
# Add port Ethernet 1/1 to VLAN 2, and configure the IP address of VLAN-interface 2.
[abc_0.DeviceB] vlan 2
[abc_0.DeviceB-vlan2] port ethernet 1/1
[abc_0.DeviceB] quit
[abc_0.DeviceB] interface vlan-interface 2
[abc_0.DeviceB-Vlan-interface2] ip address 163.172.55.1 24
[abc_0.DeviceB-Vlan-interface2] quit
# Configure VLAN-interface 2 as the network management interface.
[abc_0.DeviceB] cluster
[abc_0.DeviceB-cluster] nm-interface vlan-interface 2
72