Table of Contents
Advertisement
Channel: Specify a channel for the base station AP to operate on, for
④
example, 2437MHz (Channel 6).
Remote MAC Address: Manually enter the MAC addresses of the two
⑤
remote repeater APs (You can click Open Scan to view the MAC addresses).
⑥
Security Mode: Specify security mode/authentication type, cipher type
and security key for the base station AP.
⑦
Click Save to save your settings.
Click Network -> DHCP Server on the base AP's configuration interface
⑧
to enable the DHCP server.
64
Advertisement
Table of Contents
