Power Management; Power Management Mode - Acer 6000 User Manual

3.6

Power Management

The Power Management menu lets you configure the system power-management
feature.
The following screen shows the Power Management parameters and their default
settings:
Power Management Mode .............. [Enabled ]
IDE Hard Disk Standby Timer ...... [10] Minute(s)
System Sleep Timer ............... [10] Minute(s)
Sleep Mode ..................... [Suspend]
Power Switch < 4 Sec. ............... [Suspend ]
System Wake-Up Event
Modem Ring Indicator .............. [Disabled]
= Move Highlight Bar
Esc = Exit
3.6.1

Power Management Mode

This parameter allows you to reduce power consumption. When this parameter is
set to , you can configure the IDE hard disk and system timers. Setting it
Enabled
to deactivates the power-management feature and its timers.
Disabled
IDE Hard Disk Standby Timer
This parameter allows the hard disk to enter standby mode after inactivity of 1 to
15 minutes, depending on your setting. When you access the hard disk again,
Power Management
F1 = Help
Page 1/1
= Change Setting,
Chapter 3 - BIOS Utility 3-19