Objects On The Map; Selecting The Destination Of A Route - Fiat 124 Spider Abarth 2018 User Manual

11000001-121-111
Navigating A Route On The Map
Current Speed Limit (represented by
the 48 in the red circle): shows the
speed limit of the current road if the
map contains it.
Distance and Time to Arrival
(represented by 2.0 km/8:31): shows
the distance you need to travel on the
route before reaching your final
destination and the estimated arrival
time at the final destination of the route.
Note:
Some functions are not available
depending on some countries and
regions.

Objects On The Map

Streets And Roads: the navigation
system shows the roads in different
widths and colors so that they can be
easily identified. A highway will be
thicker and a different color than a small
street.
Turn Preview And Next Street: when
navigating a route, the top section of
the Map screen shows information
about the next maneuver, street or
town. There is an area at the top left
part of screen which indicates the next
operation. Displays both the event type
(such as turning, detouring, exiting
expressways) and the distance from the
current position.
Lane Information And Signposts: when
navigating on multilane roads, it is
important to take the appropriate lane
in order to follow the recommended
route. If lane information is available in
the map data, the navigation system
displays the lanes and their directions
using small arrows at the bottom of the
map. Highlighted arrows represent the
lanes and direction you need to take.
Junction View: if you are approaching a
highway exit or a complex intersection
and the needed information exists, the
map is replaced with a 3D view of the
junction.
Expressway Exit Services: you may
need a petrol station or a restaurant
during your journey. This feature
displays a new button on the map
when you are driving on highways.
Select this Open button to open a panel
with the details of the next few exits or
service stations.
Elements Of The Active Route: the
navigation system shows the route in
the following way.
Selecting The Destination Of A
Route
To enter an address as the destination,
do as follows:
1. Select the "Add A Destination"
button after selecting the "Open/Close
Menu" button on the MAP screen.
2. Select Find Address. By default, the
navigation system locates the country
and town where you are. If needed,
select the Country, enter the first few
letters of the country name on the
keyboard, and select one country from
the list of results.
3. If needed, select a new town. Select
Town and start entering the name of the
town on the keyboard. Find the town
you need: the most likely town name is
always shown in the input field. To
accept it, select the checkbox. If the
desired name does not show up, the
names that match the string appear in a
list after entering a couple of characters
(to open the list of results before it
appears automatically, select the
"Receivable Audio Stations" button and
select the town from the list).
235