How To Use Aux Mode; Bluetooth Hands Free; Device Pairing - Fiat 124 Spider Abarth 2018 User Manual

How To Use AUX Mode

Select the icon to display
"Entertainment" on the home screen.
Select "Audio Source" to see a list of
sources available. Select AUX to switch
to the AUX mode.
Playable Data: MP3/WMA/AAC/OGG
file.
Note:
If a device is not connected to the
auxiliary jack, the mode will not switch
to the AUX mode.
Adjust the audio volume using the
portable audio device, commander
switch, or audio control switch. Audio
adjustments can also be made using
the portable audio device's volume
setting.
If the connection plug is pulled out
from the auxiliary jack while in AUX
mode, noise may occur.
This unit does not support a USB
3.0 device. In addition, other devices
may not be supported depending on
the model or OS version. USB devices
formatted to FAT32 are supported
(USB devices formatted to other
formats such as NTFS are not
supported).
232

Bluetooth Hands Free

Warning!
Always drive safely with your hands on
the steering wheel and obey all applicable
laws. You have full responsibility and
assume all risks related to the use of the
features and applications in this vehicle.
Only use the features and applications in
this vehicle when it is safe to do so. Failure
to do so may result in an accident involving
in serious injury or death.
It can be dangerous, if the volume of the
sound system is too loud. If the volume is
too loud to hear background noises (e.g.
horns, ambulances, police vehicles, etc.)
injury may occur.
General Information
FCC Rules and with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any
interference received, including
interference that may cause undesired
operation.
Note:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's
authority to operate the equipment.

Device Pairing

To use Bluetooth audio and
Hands-Free, the device equipped with
Bluetooth has to be paired to the unit
using the following procedure. A
maximum of seven devices including
Bluetooth audio devices and hands-free
mobile phones can be paired.
Note:
The Bluetooth system may not operate
for one or two minutes after the ignition
is switched to ACC or ON. However,
this does not indicate a problem. If the
Bluetooth system does not connect
automatically after one or two minutes
have elapsed, make sure that the
Bluetooth setting on the device is
normal and attempt to reconnect the
Bluetooth device from the vehicle side.
Pairing Procedure
Proceed as follows:
1. Select the icon on the home
screen to display the "Settings" screen.
2. Select the Devices tab.