Rear turn signal lights
■
Open the trunk, remove the 2
1
covers and 2 screws and pull the
light unit toward the rear of the
vehicle to remove it.
When removing the cover, wrap the
tip of the screwdriver with tape to
protect the vehicle from damage.
Turn the bulb base counterclock-
2
wise.
Remove the light bulb.
3
Install a new light bulb then install
4
the bulb base to the light unit by
inserting it and turning the bulb
base clockwise.
After installing the light bulb, turn on
the rear turn signal light to visually
check that there is no light leaking
from the bulb base.
7-3. Do-it-yourself maintenance
547
7