Fold the seatback completely for-
2
ward.
The front seat will move forward
automatically.
Returning the front seat to its original position
■
Move the seatback backward until it locks. The front seat will return to its orig-
inal position automatically.
When adjusting the seat
■
Take care when adjusting the seat so that the head restraint does not touch the ceiling.
●
RC350/RC300/RC200t: When folding down a rear seatback, if it interferes with a
●
front seatback, adjust the front seat position so that the seats no longer interfere with
each other. However, if adjusting the front seat position causes the correct driving pos-
ture to not be maintained, return the rear seatback to its original position. (→P. 167)
Lever-operated "Front, Fold & Return" seat
■
After the front seat is moved forward by operating the "Front, Fold & Return" seat lever,
●
if a power seat adjusting switch or a driving position memory switch is pressed, the front
seat will not return to its original position even if the front seatback is moved backward
until it locks.
The lever-operated "Front, Fold & Return" seat will not operate in the following situa-
●
tions:
• The front seat belt of the seat to be operated is fastened.
• The engine switch is in IGNITION ON mode and the shift lever is in a position other
than P (driver's seat only).
Operation of the lever-operated "Front, Fold & Return" seat will stop in the following sit-
●
uations:
• A power seat adjusting switch or a driving position memory switch is pressed.
• The front seat belt of the seat which is operating is fastened.
• The engine switch is in IGNITION ON mode and the shift lever is moved to a posi-
tion other than P (driver's seat only).
Jam protection function
■
While the lever-operated "Front, Fold & Return" seat is operating, if an object is stuck
either in front of or behind the front seat, the front seat will stop and then move in the
opposite direction slightly.
3-3. Adjusting the seats
165
3