126
2. Instrument cluster
Settings display
Language
■
Select to change the language on the display.
Units
■
Select to change the unit of measure for fuel consumption.
Maintenance system (U.S.A. only)
■
Select to reset the maintenance data after the required maintenance is per-
formed. (
→P. 489
Eco Driving Indicator Light
■
Select to activate/deactivate the Eco Driving Indicator Light.
switch settings
■
Displays a procedure to register a desired screen to
You can register 1 screen as a shortcut, which can be displayed by pressing
. (→P. 118)
Drive information 1/Drive information 2
■
Select to select up to 2 items that will be displayed on the "Drive Info 1" screen
and "Drive Info 2" screen respectively.
Pop-up display
■
Select to set the following pop-up displays, which may appear in some situa-
tions, on/off.
• Route guidance display of the navigation system-linked system
(if equipped)
• Incoming call display of the hands-free phone system
• Dynamic radar cruise control operation display (if equipped)
• Instrument panel brightness adjustment display
• TVD control mode change display (if equipped)
• Drive mode change display
Rev indicator
■
Select to set the rev indicator on/off.
When set to on, proceed to select the engine speed at which the rev indicator
will be displayed.
Rev peak
■
Select to set the rev peak on/off.
)
.
(→P. 119)